Launch X-431 Euro Tab III (1+1 with updates)
- X-431 EURO TAB III is a top comprehensive fault diagnosis tester for more than 40 car brands.
- Professional level tester suitable for repair shop use
- Includes a 1-year license for HaynesPro Electronics and Smart databases (no further subscription required)
- Includes a 1-year update package for diagnostic software
- Wireless diagnostic interface with Bluetooth
- Able to perform special functions (activation/adaptation/coding/usability tests)
4 785,00€
In stock - Fast delivery on weekdays.
Delivery time: 1-3 weekdaysShipping cost 4,90€- Description
- Reviews (0)
Description
Launch X-431 Euro Tab III (1+1 with updates)
X-431 EURO TAB III is a top comprehensive fault diagnosis tester for more than 40 car brands.
With the fault diagnosis tester with a 13.3″ tablet and the Android 9 system, you can perform versatile diagnostic functions for most car brands.
The tester includes functions for diagnostics, maintenance resets and special functions. With the HD package available as an accessory, the tester can also be used for heavy vehicles.
ADAS calibration tables for performing ADAS calibrations are also available as an accessory for the tester.
Fault diagnosis functions:
- Reading and deleting fault codes from all systems in the vehicle
- Monitoring of sensor values in digital and graphic form
- Acknowledgment of maintenance, such as e.g. maintenance intervals, electric handbrake maintenance, DPF regeneration, etc.
- Able to perform special functions (activation/adaptation/coding/usability tests)
Direct maintenance functions:
- ABS Bleeding
- AC System re-learn/Initialisation
- Resetting adaptive front lighting (Adaptive front lighting)
- Adblue reset
- Air/fuel reset
- Chassis/suspension height adjustment (Air level calibration)
- Battery registration/coding (Battery matching)
- Maintenance of the electric handbrake (opening/closing operation) (Brake reset)
- Expression of the cooling test (Coolant bleed)
- Crank sensor Adaptive learning pp
- Particulate filter (DPF) regeneration (DPF regeneration)
- EGR adaptation (EGR adaptation)
- Electric throttle relearn
- Engine power balance monitoring
- Gas particulate filter regeneration
- Resetting the adaptation values of the automatic gearbox (Gearbox relearn)
- High voltage battery diagnostics (High voltage battery diagnostics)
- Key coding (Immo Prog) Note! Requires X-PROG 3 key programmer
- Resetting the immobilizer (Immobiliser reset)
- Coding of injectors (Injector coding)
- Adaptive cruise control (Intelligent cruise control)
- Language change
- Motor angle calibration
- NOX sensor reset (NOX sensor reset)
- Oil maintenance reset
- Seat occupancy calibration
- Steering angle reset
- Start/stop system reset
- Sunroof reset
- Tire reset
- Resetting the tire pressure monitoring system (TPMS) (TPMS database reset)
- Transport mode
- Window calibration
Vehicle coverage:
- Asia: Acura, Daewoo, Daihatsu, Honda, Huyandai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki, Toyota.
- Europe: Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Jaguar, Lancia, Land Rover, Mercedes Benz, MB Sprinter, Opel, Peugeot, Porcshe, Renault, Rover, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, Volkswagen.
- America: Chrysler, Ford, GM.
SEE MORE DETAILED COVERAGE OF THE SOFTWARE BY CLICKING HERE
Attention too:
- English device
- Includes a 1-year license for HaynesPro Electronics and Smart databases (no further subscription required)
- Includes a 1-year update package for diagnostic software
- Reset programs and special functions on the diagnostic side (such as adaptations/coding etc.) require a valid update license. These functions cannot be performed with the tester if the update license is not valid
- Integrated in the diagnostic module J2534 Pass-through feature for factory connection (the function requires a laptop to install the program for connection)
- Wireless diagnostic interface with Bluetooth
- Possibility to connect a Wi-Fi printer (X431 Pro Wi-Fi Printer)
- SmartLink C VCI diagnostic module (supports LAUNCH super remote diagnosis system, DoIP, Passthru and HD diagnostics (HD software optional))
- In the diagnostic module, support for CAN / CANFD / DoIP J2534 / D-PDU / RP1210 communication protocols and standards
Technical information:
- Operating system: Android 9
- CPU: 2.0 GHz Octa-Core
- Screen: 13.3″ 1920×1080
- Battery: 9360 mAh, 7.6V/71.1Wh
Available accessories:
- X431 Wi-Fi printer
- VSP-600 videoscope
- BST-360 battery tester
- X-PROG 3 key programming device
- HD package (software/adapters)
- ADAS calibration tables
- Sensor simulator (Sensorbox)
- Four-channel Launch O2-1 oscilloscope
- TSGUN TPMS sensor programmer
Be the first to review “Launch X-431 Euro Tab III (1+1 with updates)”
JAA / KOPIOI TUOTTEEN TIEDOT:
Reviews
There are no reviews yet.