P0141 – O2 Sensor Heater Circuit (Bank 1 Sensor 2)
Description
The ECM detects a malfunction in the heater circuit of the downstream O2 sensor on Bank 1.
Need More Than Just the Fault Code?
A diagnostic scanner with live data, freeze-frame information and the right system access can help you investigate the actual cause before replacing parts.
Compare Diagnostic ScannersSymptoms
- Poor fuel economy
- Delayed catalyst monitoring
- Check engine light
Causes
- Failed heater element in O2 sensor
- Blown fuse
- Open or shorted wiring
- Corroded connector
Diagnosis
- Check heater fuse and power supply
- Measure heater resistance
- Verify power and ground at sensor connector
- Inspect wiring routing and damage
Repair
- Replace downstream O2 sensor if heater is faulty
- Repair wiring or connector
- Replace fuse after correcting cause
