P2100 – Throttle Actuator ‘A’ Control Motor Circuit Open
Description
The ECM detects an open control circuit in the throttle actuator motor, preventing the electronic throttle body from operating normally.
Want to confirm the real cause of this fault code?
A high-quality OBD2 scanner gives you live data, fuel trims, sensor readings and freeze-frame information — exactly what you need to verify the root cause of this code with confidence.
View Recommended ScannersSymptoms
- No throttle response
- Limp mode
- Rough or unstable idle
- Engine may stall
- Check Engine light
Causes
- Open or corroded wiring
- Faulty throttle actuator motor
- Faulty accelerator pedal position sensor
- PCM/ECM driver failure
- Poor ground connection
Diagnosis
- Inspect wiring and connectors
- Measure voltage and resistance at the actuator motor
- Test accelerator pedal position sensor
- Check fuses and relays
- Verify PCM/ECM output signals
Repair
- Repair or replace damaged wiring
- Replace throttle actuator / throttle body
- Replace accelerator pedal position sensor
- Repair or replace PCM/ECM
- Clear codes and perform road test
